ESP8266 CH340 USB TTL Converter ESP-12 ESP-07 ESP-07S ESP-12S Board

ESP8266 CH340 USB TTL Converter ESP-12F ESP-07 ESP-07S ESP-12S Board Win OSX Linux

ESP8266 CH340 USB TTL Converter Board © androegg

USB TTL Converter CH340 for ESP8266 Modules © androegg

Das ESP8266 CH340 USB TTL Konverter Board ist wie folgt verfügbar:

• ESP8266 CH340 Board mit ESP-07
• ESP8266 CH340 Board mit ESP-07S
• ESP8266 CH340 Board mit ESP-12F
• ESP8266 CH340 Board mit ESP-12S

Das ESP8266 CH340 Board verfügt zusätzlich über

• einen Reset Button
• einen Schalter für Flash Modus

Das CH340 USB TTL Konverter Board ist optimiert zum Flashen / Beschreiben mittels RS232 / seriellem Protokoll. Das CH340 USB TTL Konverter Board ist geeignet für OS X , Windows, sowie gängige Linux Derivate.

Alle aktuellen Treiber als download verfügbar

Bei den typischen USB Treiber Problemen unter OS X bitte auf unserer Internetseite, bzw. in unserem Datenblatt nachschlagen.

The ESP8266 CH340 USB TTL Converter Board is available

• ESP8266 CH340 Board incl. ESP-07
• ESP8266 CH340 Board incl. ESP-07S
• ESP8266 CH340 Board incl. ESP-12F
• ESP8266 CH340 Board incl. ESP-12S

The ESP8266a CH340 Board got

•  Reset Button
• Switch for Flash Mode

The ESP8266 CH340 USB TTL Converter Board is optimized for Flashing, Writing, and Reading using serial Protocol. The ESP8266 CH340 USB TTL Converter works on OS X Windows also common Linux Derivatives

all driver downloads available

Please check our Data Sheet for solving common problems during MAC OS X Driver Installation.

ESP8266 CH340 USB TTL Converter Board Features:

• supports a wide range of ESP8266 Modules with 2mm Pitch such as
  ESP-07
  ESP-07S
  ESP-12
  ESP-12E
  ESP-12F
  ESP-12S
• Reset Button
• Flash Mode Switch
• provides a virtual serial port over USB 2.0 port
• full speed 2.0 USB interface
• based on 340G chip
• supports operating systems as follows:
  • Linux
  • Mac OSX
  • Windows
• supports baud rates from 50 bps up to 2 Mbps
• supports CH341 driver
• Operating current typ. 12 mA up to 30mA
• Clock-frequency typ. 12 MHz.
• Power-on reset time typ. 20 ms up to 50 ms
• USB A Connector (male)
• Transmitter baud rate error less than 0,3%
• Receiver baud rate tolerance < 2%